Boss Ground Joint Spuds, 1 3/8 in, Plated Steel
- The spud part of the coupling serves as one half of the Boss Ground Joint connection and is usually fixed to the equipment
- The stem part that is clamped to the hose is the other half
- The two halves are connected or disconnected by rotating the wing nut on the spud
- When connected they achieve both a mechanical and a pressure seal
- Leakproof and easy to seal
- Recommended for steam service up to 450°F
WARNINGSpecifications
UNSPSC Code
40141700
Weight
0.7lb
Height
1.4in
Width
1.85in
Length
2.05in
Body Material
Plated Steel
Brand
Dixon Valve
Category
Fitting Parts & Accessories
Connection Type
Male/Female
Female Thread
3/4 in
Length [Nom]
1 3/8 in
Male Thread
1 1/2 in
Manufacturer
Dixon Valve
Material
Plated Steel
Operating Temp. [Max]
450 °F
Quantity
50 per pack
Thread - TPI or Pitch
3/4 in
Type
Connector
Used With
Boss Ground Joint Fitting; Hose
Width [Nom]
1 7/8 in
Wt.
0.7 lb
Compare
Boss Ground Joint Spuds, 1 3/8 in, Plated Steel
- The spud part of the coupling serves as one half of the Boss Ground Joint connection and is usually fixed to the equipment
- The stem part that is clamped to the hose is the other half
- The two halves are connected or disconnected by rotating the wing nut on the spud
- When connected they achieve both a mechanical and a pressure seal
- Leakproof and easy to seal
- Recommended for steam service up to 450°F
WARNING